Table of Contents
Advertisement
4.4.2 Port setting
In this port setting screen (refer to figure 4-11), the parameters managing ports that are part of a VLAN
will be provided, and you ca
are tagged by the ports PVID.
The page contains the following fields:
• Port
• Mode
• Acceptable Frame
Type
• PVID
n set the default VLAN ID (PVID). All untagged packets arriving to the device
Figure 4-11 VLAN Port Setting screen
Displays the port number included in the VLAN
Indicates the port mode. Possible valu
• General - The port belongs to VLANs, and each VLAN is
user-d
efined as tagged or untagged (full 802.1Q mode).
• Access - The port belongs to a single untagged VLAN. When a
port is in Access mode, the packet types which are accepted on
the port (pack
possible to enable/ disable ingress filtering on an access port.
• Trunk - The port belongs to VLANs in which all ports are tag
(except for
an optional single native VLAN).
P
acket type a
ccepted on the port. Possible values are:
• Admit Tag Only - indicates that only tagged packets are
accepted on the port.
• Admit All - indicates that both tagged and
accepted on the port.
A
ssigns a VLAN ID to untagged packets. The possible values are 2
409
4. VLAN 4095 is defi
the discard VLAN. Packets classified to the Discard VLAN are
es are:
et type) cannot be designated. It is also not
ned as per standard and industry practice as
ged
untagged packets are
to
Advertisement
Table of Contents
