Clear Counters; Set Interface Active - Planet WGSD-1022 User Manual

Default Configuration
Jumbo Frames are not enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, Jumbo Frames are enabled on the device.
Console# port jumbo-frame

5.7.12 clear counters

The clear counters user EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
Interface — Valid Ethernet port.
port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.
console# clear counters ethernet g1

5.7.13 set interface active

The set interface active privileged EXEC mode command reactivates an interface that was suspended by the system.
User's Manual of WGSD-1022/WGSD-8000
- 208 –