4.9.2
The Global
The Global STP screen (see figur
Global Setting Spanning Tree Stat
The page contains the following fields:
Global Setting
• STP Operation Mode This indicates the STP mode by which STP is enabled on the device.
• BPDU Handling
• Path Cost Default
Values
STP
e 4-46) contains parameters for enabling STP on the device.
e, which indicates if STP is enabled on the d
Figure 4-46 Global STP screen
The possible field values are:
• Classic STP, where enables Classic STP on the device. This is
the default value.
• Rapid STP, where enables Rapid STP on the device.
• Multiple STP, where enables Multiple STP on the device.
This determines how BPDU packets are managed when STP is
disabled on the port/ device. BPDUs are used to transmit spanning
tree information. The possible field values are:
• Filtering, where filters BPDU packets when spanning tree is
disabled on an interface. This is the default value.
•
Flooding, where floods BPDU packets when spanning tree is
disabled on an interface.
This specifies the method used to assign default path costs to STP
ports. The possible field values are:
• Short, specifies 1 through 65,535
This is the default value.
• Lon
g, specifies 1 through 200,000,000 range for port path costs.
The default path costs assigned to an interface varies according
evice.
range for port path costs.