Show Clock - Planet WGSD-1022 User Manual

ip-address — IP address of the server. An out-of-band IP address can be specified as described
in the usage guidelines
hostname — Hostname of the se
poll — Enable polling.
key keyed — Authentication ke
4294967295)
Default Configura
No servers are defined.
Command Mode
Global Configuration mode
User Guidelines
Up to 8 sntp servers can be d
Use the sntp unicast client enables global configuration command to enable predefined unicast clients
glo bally.
To enable polling you should also use the sntp unicast client poll global configuration command for global
enabling.
Polling time is determined by the sntp client poll timer global configuration command.
To define an SNTP server on the out-of-band port, use the out-of-band IP address format:
oob/ip-address.
Examples
The following example configures the device to accept Network Time Protocol (NTP) traffic from the
server on 192.1.1.1
Console (config)# sntp server 192.1.1.1

5.5.15 show clock

The show clock user EXEC command displays the time and date from the system clock.
Syntax
show clock
Default Configuration
This command has no default configuration.
rver. (Range: 1 - 160 characters)
y to use when sending packets to this peer. (Range:1 –
tion
efined.