The WGSD-1022 is a managed Ethernet Switc
telnet interface, and W
eb interface. This chapter describer how to configure the Switch through these
interfaces.
W
hen you are ready to configure the smart functions of th
s
upplied RS-232 serial cable to the RS-232 port at the front panel of your WGSW-24010 Switch and your
P
C.
5.1 Connect to PC's RS-2
Hyper Terminal
In Windows
98/2000/XP, launch "HyperTerminal", create a new connection, and adjust settings as below:
B
aud per second: 38400
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: No
5. COMMAND STRUCTURE
h that can be controlled by the RS-232 console interface,
32 serial port
ne
e Switch, make sure you had connected the