Qos Cos Override - Planet WGSD-1022 User Manual

Default Configuration
Port CoS is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) command
User Guidelines
There are no user guidelines for this command.
Example
The following example configures port e5 default CoS value to 3.
Console (config)# interface ethernet e5
Console (config-if) qos cos 3

5.17.11 qos cos override

The qos cos override interface configuration command overrides the CoS of incoming packets. To
disable the override, use the no form of this command.
Syntax
qos cos override
no qos cos override
This command has no arguments or keywords.
Default Configuration
CoS Override is disabled
Command Mode
Interface configuration (Ethernet, Port-Channel).
User Guidelines
This command enables to override the CoS value of tagged packets, with the value configured by the
qos cos command.
Example
The following example overrides the CoS of incoming packets.
Console(config)# qos cos override