Table of Contents
Advertisement
•
Root Port
• Root Path Cost
• Root Maximum Age This indicates the device Maximum Age Time. The Maximum Age
(sec)
• Root Hello Time
(sec)
• Root Forward delay
(sec)
• Topology Changes
Counts
• Last Topology
Change
instance ID.
Where indicates the port number that offers the lowest cost path from
this bridge to the Root Bridge. It is significant when the Bridge is not
the Root.
The default is zero.
Where the cost of the path from this bridge to the root.
Time indicates the amount of time in seconds a bridge waits before
sending configuration messages.
The default max age is 20 seconds. The range is 6 to 40 seconds.
This indicates the device Hello Time. The Hello Time indicates the
amount of time in seconds
a root bridge waits between configuration messages.
The default is 2 seconds. The range is 1 to 10 seconds.
This indicates the device forward delay time. The Forward Delay Time
indicates the amount of time in seconds a bridge remains in a
listening and learning state before forwarding packets.
The default is 15 seconds. The range is 4 to 30 seconds.
which indicates the total amount of STP state changes that have
occur
red
Which indicates the amount of time that has elapsed since the bridge
was initialized or reset, and the last topographic change occurred.
The time is displayed in a day hour minute second format, for
e
xample, 2 days 5 hours 10 minutes and 4 seconds.
Advertisement
Table of Contents
