Table of Contents
Advertisement
4
.12.6
Cable T
The Cable Test screen (see figure 4-73) shows you results from performance tests on copper cables. The
maximum cable length
that can be tested is 120 meters. Cables are tested when the ports ar
d
own state
, except for the Approximate Cable Length test.
The page contains the following fields:
• Port
• Test Result
• Cable Fault Distance This is the distance from the port at which th
• Last Update
• Cable Length
est
Figure 4-73 Cable Test screen
This is the port to which the cable is
• OK - indicates that the cable passed the test.
• No Cable - means no cable connected to the port.
• Open Cable -means the cable is connected on only one side.
• Short Cable - indicates that a short has occurred in the cable.
This is the last time the port was tested
This is the approximate length of the cable.
The Cable Length test can be per
operating at 1Gbps
connected.
e cable error occurred
formed only when the port is up and
e in the
Advertisement
Table of Contents
