Bridge Multicast Forward-All - Planet WGSD-1022 User Manual

Examples
This example forbids port 1 to be a Forwarding-unregistered-multicast-addresses port within VLAN 8.
console (config)# interface vlan 8
console (config-if)# bridge multicast forward-unregistered add ethernet 1
5.4.7 bridge multicast forwa
The bridge multicast forward-all inte
packets on a port. To restore the default, use the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forw ard-all {add | remove} {ethernet interface-list | port-channel
port-channel-number-list}
no bridge multicast forwar
add — Adds ports to the group.
remove — Removes ports from the group.
interface-lis t — Separate non consecutive valid Ethernet ports with a comma and no spaces; a
hyphen is used to designate a range of po
port-channel-number-list — Separate non co
spaces; a hyphen is used to designate a range of port-channels.
D efault Configuration
Disable forward-all on all ports.
Command Mode
Interface Configuration (VLAN) mode
User Gu idelines
There are no user gu idelines for this command.
Example
In this example all multicast packets on port e8 a
console (config)# interface vlan 2
console (config-if)# bridge multicast forward-all add ethernet e8
rd-all
rface configuration command enables forwarding of all multicast
d-all
rts.
nsecutive valid port-channels with a comma and no
re forwarded.