Unlock The Console; Secure The Switch; Set Password - Planet FSD-1020 Manual

3-24 Operation
Mini-Console is unlocked by setting the Lock Function to "Disable".

Unlock the Console

Once the console is locked, a password will be asked when the menu item
UNIT CONFIG is selected.
In the password session, a message "* * * *_ _ _ _ PSW" will be shown. You
have to key in the correct password to enter the submenu. The regular
Password assigned by you and the Super Password are all accepted. The first
four asterisks are used for normal password while the others are used for Super
Password. The regular password is assigned by the user and the Super
Password is "0 2 1 6 1 9 9 7". The Super Password is used in case you forget
your password.
After the password session is passed, you can go to the sub menu of UNIT
CONFIG. Then enter following command to unlock the Mini-Console:
UNIT CONFIG > CONSOLE LOCK > DISABLE><Enter and hold>
After the command is complete, the lock sign should be OFF and you are free
to configure any settings.

Secure the Switch

Two passwords are provided to protect the device from being accessed anyone
other than administrator. Further information regarding Password and Super
Password, please refer to Unlock the Console section.

Set Password

Enter a 4 digit password using the numbers from 0~9.
The <Prev> key can be pressed to select the password number. The <Next>
key is used to move from one digit of password to the next one. When the
password digits have been keyed in, press <Enter> to complete the password
PLANET Desktop Switch