Table of Contents
Advertisement
EapolReqFramesTx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
5 .29.15
d ot1x auth-not-req
T
T
The dot1x auth-not-req interface VLAN configuration command enables unauthorized users access to
that VLAN. Use the no form of this command to disable the access.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
This command has no arguments or keywords.
Default Configuration
User should be authorized to access the VLAN.
Command Mode
Interface configuration (VLAN) mode
User Guidelines
To define a VLAN for authorized and unauthorized users use the dot1x auth-not-req interface VLAN
command.
Examples
The following example enables unauthorized users access to the VLAN.
console config-if(Config-VLAN)# dot1x auth-not-req
Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that have
been transmitted by this Authenticator.
The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
The number of EAPOL frames that have been received by this
Authenticator in which the Packet Body Length field is invalid.
The protocol version number carried in the most recently received
EAPOL frame.
The source MAC address carried carried in the most recently received
EAPOL frame.
Advertisement
Table of Contents
