Table of Contents
Advertisement
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
Port
-----
e1
e2
e3
5.8 GVRP Commands
5.8.1 gvrp enable (global)
GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to propagate
VLAN information from device to device. With GVRP, a single switch is manually configured with all
desired VLANs for the network, and all other switches on the network learn these VLANs dynamically.
The gvrp enable global configuration command enables GVRP globally. To disable GVRP globally on
the switch, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Broadcast Storm control [kbyes/sec]
-------------------------------------------------
8000
Disabled
Disabled
Advertisement
Table of Contents
