Ip Http Authentication - Planet WGSD-1022 User Manual

S yntax
e nable authentication
n enable authentication o
default — Uses the default list created with the authentication enable comm
list-name — Uses the indicated list created with the authentication enable co
D efault Configuration
U ses the default set with the command authentication enable.
Comman d Mode
Lin e Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a higher privilege
level from a remote Telnet or console.
conso le (config) # line cnsole
console (config-line) # enable authen

5.3.5 ip http authentication

The ip http authentication
http. To return to the default, use the no form of this command.
Syntax
ip http authentication method1 [method2...]
n ip http authentication o
method1 [method2...] — Specify at least one from the following table
Keyword Source or destination
local Uses the local username database for authentication
none Uses no authentication
radius Uses the list of all RADIUS servers for authentication
{default | list-name}
tication default
global configuration mode command specifies authentication methods for
and.
mmand.