force-unauthorized — Deny all access through this interface by forcing the port to transition to
the unauthorized state, ignoring all attempts by the client to authenticate. The switch cannot
provide authentication services to the client through the interface.
Default Configuration
force-authorized
Command Mode
Interface configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1X authentication on the interface.
Console (config)# interface ethernet e8
Console (config-if)# dot1x port-control auto
5.29.4 dot1x re-authentication
The dot1x re-authentication interface configuration command enables periodic re-authentication of the
client. Use the no form of this command to return to the default setting.
Syntax
dot1x re-authentication
no dot1x re-authentication
This command has no arguments or keywords.
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.