Table of Contents
Advertisement
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
Back Pressure will operate only if duplex mode is set to half.
Example
In the following example Back Pressure is enabled on e5.
Console(config)# interface ethernet e5
Console(config-if)# back-pressure
5.7.11 port jumbo-frame
The port jumbo-frame global configuration command enables jumbo frames for the device. To disable
jumbo frames, use the no form of this command.
Syntax
port jumbo-frame
no port jumbo-frame
Default Configuration
Jumbo Frames are not enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, Jumbo Frames are enabled on the device.
Console# port jumbo-frame
5.7.12 clear counters
The clear counters user EXEC mode command clears statistics on an interface.
Advertisement
Table of Contents
