Table of Contents
Advertisement
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forbids adding VLANs number 234 till 256, to e8.
Console (config)# interface ethernet e8
Console (config-if)# switchport forbidden vlan add 234-256
5.27.16 map protocol protocols-group
The map protocol protocols-group VLAN database command adds a special protocol to a named
group of protocols, which may be used for protocol-based VLAN assignment. To delete a protocol from a
group, use the no form of this command.
Syntax
map protocol protocol [encapsulation] protocols-group group
no map protocol protocol encapsulation
protocol — The protocol is a protocol number or one of the reserved names. The format is Hex
format.
encapsulation — One of the following values: ethernet, rfc1042, llcOther. If no option is
indicated the default is ethernet.
group — Group number of group of protocols associated together. (Range: 1 - 2147483647)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
The following protocol names are reserved:
ip-arp
ipx
Advertisement
Table of Contents
