Ports To Vlan - Planet WGSD-1022 User Manual

• Ingress Filtering
• LAG
Port Mode
Access
General
Trunk

4.4.3 Ports to VLAN

The Ports to VLAN screen contain
(PVID) is configure d on the Creat
by the ports PVID. The Ports to VL
Ports are assigned VLAN membership by selecting and configuring the presented configuration options,
you can refer to figure 4-12.
dro pped
E nables or disables Ingress filtering on the port. Ingress filtering
dis cards packets which
Indicates the LAG to which the VLAN is defined
VLAN Membership
Belo ngs to a single untagged VLAN
Allow ed to belongs t o multiple untagged
VLANs at the same time
Allow ed to belongs to multiple Tagged
VLAN s at the same time
s fields for configuring ports to a VLAN. The port default VLAN
e VLAN screen. All untagged packets arriving to the device are tagged
AN screen contains a Port Table for VLAN parameters for eac
Figure 4-12 Ports to VLAN screen
do not include an ingress port
( Tag=PVID be remo
(Tag=PVID or Original VID be remained)
Frame Leave
Untagged
ved)
Untagged
(Tag=PVID be removed)
Tagged
ID
h port.