Table of Contents
Advertisement
Alarm
Owner
Interval
Sample Type
Startup Alarm
Rising Threshold
Falling Threshold
Rising Event
Falling Event
5.19.8 rmon event
The rmon event global configuration command configures an event. To remove an event, use the no
form of this command.
Alarm index.
The entity that configured this entry.
The interval in seconds over which the data is sampled and compared with
the rising and
falling thresholds.
The method of sampling the variable and calculating the value compared
against the thresholds. If the value is absolute, the value of the variable is
compared directly with the thresholds at the end of the sampling interval. If
the value is delta, the value of the variable at the last sample is subtracted
from the current value, and the difference compared with the thresholds.
The alarm that may be sent when this entry is first set. If the first sample is
greater than or equal to the rising threshold, and startup alarm is equal to
rising or rising and falling, then a single rising alarm is generated. If the first
sample is less than or equal to the falling threshold, and startup alarm is
equal falling or rising and falling, then a single falling alarm is generated.
A sampled statistic threshold. When the current sampled value is greater than
or equal to
this threshold, and the value at the last sampling interval is less than this
threshold, a
single event is generated.
A sampled statistic threshold. When the current sampled value is less than or
equal to this threshold, and the value at the last sampling interval is greater
than this threshold, a single event is generated.
The event index used when a rising threshold is crossed.
The event index used when a falling threshold is crossed.
Advertisement
Table of Contents
