Show Gvrp Statistics - Planet WGSD-1022 User Manual

Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to display GVRP configuration information:
Console# show gvrp configuration
GVRP Feature is currently enabled on the switch.
Maximum VLANs: 255,
Port(s) GVRP
Status
-------- -------------
e1 Enabled
e4 Enabled

5.8.9 show gvrp statistics

The show gvrp statistics User EXEC command displays GVRP statistics.
Syntax
show gvrp statistics [ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet interface.
port-channel-number — A valid trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Registration Dynamic
VLAN
---------------- ---------------
Normal Enabled
Normal Enabled
Timers Leave
(milliseconds)
Creation
--------------------- ---------------- -------------
200 600
200 600
Leave
All
Join
10000
10000