Show Bridge Address-Table Static - Planet WGSD-1022 User Manual

Command Mode
P rivileged EXEC mode
User Guidelines
There are no user guidelines for this command.
E xample
I n this example, all classes of entries in the bridge-forwa
console# show bridge address-table
Aging time is 250 sec
vlan
-----
1
1
200
5

.4.14 show bridge address-table static

T he show bridge address-table static privileged EXEC command displays statically created entries in
the bridge-forwarding database.
Syntax
show bridge addr ess-table static [vlan vlan] [ethernet interface | port-channel port-channel-number]
vlan — S pecific valid VLAN, such as VLAN 1.
interface — A valid Ethernet port.
port-channel-number — A valid port-chan
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all static entries in the bridge-forwardin
mac address
-------------------
0060.704C.73FF
0060.708C.73FF
0010.0D48.37FF
rding database are displayed.
port
------
e8
e8
e8
nel number.
g database are displayed.
type
--------
dynamic
dynamic
static