Table of Contents
Advertisement
The W
GSD-1022 can be
be se
t on same the IP sub
addre
ss of the Switch to 192.1
shoul
d be set at 192.16
8.1.x (where x is a number between 1 and 253) with subnet mask 255.255.255.0.
Or you ca
n use the f
actory default IP address 192.168.1.254 to do the relative configuration on manager
PC. T
he ceen in
s
Figure 4-1 appears.
Logging on the switch
1.
Use Internet Exp
lorer 5.0 or above Web browser. Enter the factory-default IP address to access the
We interface. The facto
b
h
ttp://192.16
8.1.254
2.
When the following login screen appears, the system will ask you to enter the username and
password.
Default User name: admin
Default Password: admin
The login screen in Figure 4-2 appears.
configured through an Ethernet connection, make sure the manager PC must
net address with the switch. For example, if you have changed the default IP
68.1.1 with subnet mask 255.255.255.0 via console, then the manager PC
Figure 4-1 Web Management via ethernet
ry-default IP Address as following:
4. Web Configuration
Advertisement
Table of Contents
