Dot1X Max-Req; Dot1X Timeout Supp-Timeout - Planet WGSD-1022 User Manual

5.29.9 dot1x max-req

The dot1x max-req interface configuration command sets the maximum number of times that the switch
sends an Extensible Authentication Protocol (EAP) - request/identity frame (assuming that no response
is received) to the client, before restarting the authentication process. Use the no form of this command
to return to the default setting.
Syntax
dot1x max-req count
no dot1x max-req
count — Number of times that the switch sends an EAP - request/identity frame before restarting
the authentication process. (Range: 1 - 10)
Default Configuartion
2
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the number of times that the switch sends an EAP - request/identity frame, to
6
Console (config)# interface ethernet e8
Console (config-if)# dot1x max-req 6

5.29.10 dot1x timeout supp-timeout

The dot1x timeout supp-timeout interface configuration command sets the time for the retransmission
of an Extensible Authentication Protocol (EAP)-request frame to the client. Use the no form of this
command to return to the default setting.
Syntax
dot1x timeout supp-timeout seconds