Table of Contents
Advertisement
To
ret rn from Global Configuration mode to Privileged EXEC mode, the user can use one of the
u
followin
g commands:
exit
end
Ctrl+Z
The following example illustrates ho
Privileged EXEC mode:
console #
console # configure
console(config) # exit
console #
I
nterface Configuration Mode and Spec
Modes
Interface Configuration commands are to modify specific interface operations. The following are the
Interface Configuration modes:
Line Interface—Contains commands to configure the management connection
commands such as line speed, timeout settings, etc. The Global Configuration mode command
line is used to enter the line configuration command mode.
VLAN Database—Contains commands to create a VLAN as a
mode command vlan database is used to enter the VLAN Data
mode.
Management Access List—Contains commands to define management access-lists. The Global
Configurati
on mode command management access-list is used to enter the Management
Access List Configuration mode.
Ethernet
—Contains commands to manage port configurati
command interface ethernet enters the Interface Configuration mode to configure
type interface.
Port Channel—Contains commands to configure port-channels, for example, assigning ports to a
VLAN or port-channel. Most of these commands are the s
interface mode, and are used to manage the m
w to access Global Configuration mode and teturn back to the
ember ports as a single entity. The Global
ific Configuration
s. These include
whole. The Global Configuration
base Interface Configuration
on. The Global Configuration mode
ame as the commands in the Ethernet
an Ethernet
Advertisement
Table of Contents
