Sntp Unicast Client Enable - Planet WGSD-1022 User Manual

User Guidelines
Use the sntp clien t enable global configuration command to enable broadcast clients globally.
Use the sn tp anycast client enable global configuration command to enable anycast clients globally.
Examples
The ol f lowing example enable
console (config)# sntp client enable

5.5.12 sntp unicast client enable

The sntp unicast client enab
Network
Time Protocol (SNTP) to requ
requesting and accepting Network Time Protocol (NTP) traffic from servers, use the no form of this
command.
Syntax
sntp unicast client enable
no sntp unicas t client enable
This command has no arguments or keywords.
D efault Configuration
D isabled
Comman d Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request
and accept Netw ork Time Protocol (NTP) traffic from servers.
console (config)# sntp unicast client enable
s the SNTP client on the interface.
le global configuration command enables the device to use the Simple
est and accept Network Time Protocol (NTP) traffic from servers. To disable