Table of Contents
Advertisement
MARKER
DATA Entry
Example
Reading frequencies and amplitudes of signals is greatly simplified using MARKER (--I .
For a given display, activate the single marker with
the signal peak.
The frequency and amplitude is read out in two dis-
play areas.
To read the left-hand signal's parameters, move the
marker to the signal peak with 0 .
The signal's amplitude and frequency is read out
directly.
Moves the marker continuously along the trace at about 5 horizontal divi-
sions each full turn. The marker moves in display unit increments.
Moves the marker along the trace one tenth of the total width per step. 0
moves marker to the right.
Places the marker at the frequency entered. An out-of-range entry results in
placement of the marker at a graticule edge.
SINGLE MARKER-NORMAL
Manual Operation 45
Advertisement
Table of Contents
