Agilent Technologies 8566B Operating And Programming Manual page 116

The read/write address of the HP 8566B can be changed from the front panel or via HP-IB by using the shift
function I?
Pressing [,.,, b. Q a @ sets the address to 18.
To set the address to 8, press (,,,, b (TJ @.
From the controller, the address can be set to 8 via HP-IB:
code for (XFJ h
As long as the analyzer internal battery has power, the analyzer address remains unchanged. (Battery lasts one
year.)
In addition to these features, an internal switch can be set which changes the default address at Power Up.
Call your nearest HP service office for more information.
Remote/Local Operation
If the controller has addressed the analyzer to TALK or LISTEN, the ADRS'D indicator lights. When the analyzer is
addressed with an HP-IB device command, the analyzer will go to remote, and the REM indicator also lights.
Remote operation generally prevents front pane1 control of the analyzer except by those functions not programma-
ble: LINE power, calibration and display adjustment, and video trigger level.
Return to front panel, or local control by pressing @ , or executing a local device command from the controller
such as
6 P r o g r a m m i n g
O U T P U T
address
ADRS'D
0
REM
LOCAL 718.
H Z ;