Item
INTEGER
Band
7 (A)
13 F)
14 0)
15 G)
17
The FULBAND command sets the start and stop frequencies for the analyzer external mixing bands. In the table
above, the start and stop frequencies for each band are shown in the Frequency Range column. On execution of
the FULBAND command, a harmonic lock (HNLOCK) is automatically executed. (See HNLOCK.)
FULBAND
Description/Default
Specifies waveguide band.
Frequency Range
2 6 . 5 - 4 0 . 0
FULBAND
Full Band (External)
Range Restriction
6to 17
Mixing Harmonic
Programming 12 1