Table of Contents
Advertisement
The MKNOISE command displays the RMS noise level at the marker. The RMS value is normalized to a 1 Hz
bandwidth.
10
OTJTPUT 718;"Ip;O3;"
20
OUTPUT 718;"MKACT 1;"
30
40
50
60
70
80
E N D
When queried (?), MKNOISE returns ON or OF followed by a carriage-return/line-feed (ASCII codes 13, 10).
The end-or-identify state (EOI) is asserted with line feed.
The functions of the MKNOISE and KSM commands are identical.
Marker Noise
Programming 241
Advertisement
Table of Contents
