Continuous Sweep
The CONTS command sets the analyzer to continuous sweep mode. In the continuous sweep mode, the analyzer
continues to sweep (sweep times L 20 ms) at a uniform rate from the start frequency to the stop frequency, unless
new data entries are made from the front panel or via HP-IB. If the trigger and data entry conditions are met, the
sweep is continuous.
The sweep light indicates that a sweep is in progress. The light is out between sweeps, during data entry, and for
sweep times 110 ms.
The functions of the CONTS and Sl commands, and front panel m key are identical.
5 8 P r o g r a m m i n g