Table of Contents
Advertisement
SAVING AND RECALLING INSTRUMENT STATES
Some [,.., KEY FUNCTION values or states cannot be saved. Neither can information in the display memories,
such as a title or trace.
Example
When a test sequence is used over and over, the instrument states can be set up in the registers prior to testing for
recall during the procedure.
Keying in a specific state: (06::)
LIN ( SCALE
Then save with [,., Q
P r e s s a
And recall the last state with (llellll
state has been recalled, any function can be used for
more detailed measurements.
Note that in this case, the state could also have been
recalled by (.,,.rrl [1] .
Registers 1 - 6 can also be locked to prevent any loss
or change in the contents of the storage registers.
registers.
86 Manual Operation
[1] O n c e t h e
INSTRUMENT STATE
Advertisement
Table of Contents
