Agilent Technologies 8566B Operating And Programming Manual page 93

MARKER SWEEPS
Stop Sweep at Marker, TALK after Marker
To stop the sweep at the marker,
press MARKER I--] and
press 11*0 u
A marker must be activated to enter this sweep function.
Each time a sweep is triggered, it will stop at the marker, even if the marker has been moved. A marker being
moved when the sweep passes may not stop the sweep.
To disable the stop sweep at marker functions
press MARKER m or I'a::] .
In remote operation, the analyzer will not TALK until the trace sweep stops at the marker. TALK is suspended by
keeping the HP-IB Data Valid line not true until the marker is placed.
MARKER TO NEXT PEAK/MARKER TO MINIMUM
Successive peaks can be identified by continuously using [ K. If a trace displays many different signal levels, a
Example
Press @ to find largest signal.
Marker to Minimum
The minimum data value in a trace can be quickly located with B N.
! ! ! ! ! ! !
Manual Operation 95
! ! 1