Table of Contents
Advertisement
Continuous Sweep
The Sl command sets the analyzer to continuous sweep mode. In the continuous sweep mode, the analyzer
continues to sweep (sweep time L 20 ms) at a uniform rate, from the start frequency to the stop frequency, unless
new data entries are made from the front panel or via HP-IB. If the trigger and data entry conditions are met, the
sweep is continuous.
The sweep light indicates a sweep is in progress. The light is out between sweeps, during data entry, and for sweep
times 40 ms.
OUTPUT 718;"Sl;"
The functions of the Sl and CONT commands and the front panel i-1 key are identical.
328 Programming
Advertisement
Table of Contents
