Table of Contents
Advertisement
Item
MARKER NUMBER
The MKACT command establishes the active marker. There can be four different numbered markers, but only one
marker can be active at any time.
A variety of commands listed in this remote section operate on the active marker. Most of them begin with the
letters "MK."
When MKACT is executed, the display readout indicates the active marker state.
OUTPUT 718;"MKACT3;"
When queried (?) , MKACT returns the number of the current active marker, followed by carriage-return/line-feed
(ASCII codes 13, 10). The end-or-identify state (EOI) is asserted with line feed.
Description/Default
Integer. Default is 1.
MKACT
Marker Active
Range Restriction
Programming 233
Advertisement
Table of Contents
