Table of Contents
Advertisement
PLOT
Item
The trace data, graticule, and annotation of the analyzer's screen can be directly transferred via HP-IB to a Hewlett-
Packard plotter such as the 7245A/B, 724OA,7470A, 9872C, or 7550 using the PLOT command.
Before executing a program, set the HP-IB on the plotter to address 5:
If the address switch on the plotter cannot be located, refer to the plotter's operation manual.
When using the PLOT command, the scaling points (Plx, Ply; P2x, P2y) must be specified. These scaling points
specify the x,y coordinates which determine the size of the plot. (For more scaling point information, refer to the
plotter's operation manual.)
Description/Default
Plotter-dependent values that specify lower left
plotter dimension.
Plotter-dependent values that specify upper
right plotter dimension.
16
8
_
-
-
- -
I -
Plx,Ply
Range Restriction
Plotter dependent
Plotter dependent
4
2
ADDRESS
- -+
I
I
PLOT
Plot
Programming 29 1
Advertisement
Table of Contents
