Table of Contents
Advertisement
Item
VARIABLE
The DL command defines a display line level and displays it on the
arithmetic functions, such as DIV or MXM.
The
functions of the DL command and the front panel reference level a key are identical. The display line also
can
turned on or off by the DLE
be
The following program lines compare a display line level of - 10 dBm to the largest signal detected. If the display
line level is greater than the signal level, the display line is lowered.
10 OUlTUT718;"IP;DL-1ODM;TS;MKPK;MAOA;"
20 ENTER718;N
30
40 0uTPuT718;50
50
END
DL
Description/Default
Alpha character. User-defined
identifier declared in VARDEF
statement.
Alpha character. Measurement-
variable identifier, such as
CF or MA.
Trace element, such as TRA [ 101
and L(a commands.
Range Restriction
AA-ZZ and _
2-12 characters required.
CRT. The level is in dBm
Display Line
and can be used in
P r o g r a m m i n g 7 5
Advertisement
Table of Contents
