Table of Contents
Advertisement
CENTER FREQUENCY/SPAN TUNING CHARACTERISTICS
At the location of the band overlap (2.0- 2.5 GHz) or on band edges (- 1.0 GHz and 24 GHz), the frequency
span may change as center frequency is tuned near the above locations. This situation occurs when the frequency,
span is such that the equivalent start/stop frequency exceeds the tuning range of the analyzer.
Example
Analyzer Settings:
0 - 2.5 GHz Band
FREQUENCY SPAN = 1 GHz
CENTER FREQUENCY = 2 GHz
Note that the equivalent start/stop frequencies are 1.5
Now tune to 2.2 GHz.
4 6 A p p e n d i x
Appendix G
APPENDIX G
Advertisement
Table of Contents
