Table of Contents
Advertisement
KSE
Item
Character
REAL
Terminator
Carriage Return
Line Feed
etx
The KSE command activates
Any character on the controller keyboard can be written. The full width of the display is available for writing a
maximum of 58 characters. However, the marker readout may interfere with the last sixteen characters of the title.
The message must be terminated. Terminate the message with one of the following:
A terminator defined with the DT command.
Carriage-return (ASCII 13).
Line-feed (ASCII 10).
End-of-text command (controller dependent).
Description/Default
Represents text displayed on screen.
Represents text displayed on screen.
Character defined in OT command that
terminates text.
Terminates text.
Terminates text.
Terminates text. (End-of-text)
the title mode. This function writes a message in the top CRT display line.
Title Mode
Range Restriction
ASCII codes 32 through 126.
ASCII codes 0 through 255
ASCII code 13
ASCII code 10
P r o g r a m m i n g 1 4 3
KSE
Advertisement
Table of Contents
