Table of Contents
Advertisement
ST
Sweep Time
The ST command specifies the rate at which the analyzer sweeps the displayed frequency or time span.
The sweep times available are shown below.
FREQUENCY SPAN
(> = 1OOHz)
ZERO FREQUENCY
SPAN (0 Hz)
OUTPUT 718; "ST 100MS;"
The above program line sets the sweep time of the analyzer to 100 milliseconds.
320 Programming
SWEEP TIME
SEQUENCY
continuously
20 ms to 1500 set
continuously
20 ms to 1500 set
r e a l
SC
US
Advertisement
Table of Contents
