Table of Contents
Advertisement
Item
TRACE LABEL
VARIABLE
IDENTIFIER
NUMERIC DATA
FIELD
The MXM command compares operand 1 and operand 2, point by point, sending the greater value of each
comparison to the destination.
If one of the operands is a single value, it acts as a threshold, and all values equal to or greater than the threshold
pass to the destination.
The operands and destination may be of different length. However, the destination must be as long as the largest
operand. The trace operands (TFW, TRB, and TFK, and trace label) range from 1 to 1008 elements in length,
and a variable identifier or numeric data field is 1 element long.
Description/Default
Alpha character. User-defined label declared in
TRDEF statement.
Alpha character. User-defined identifier
declared in VARDEF statement.
Alpha character. Measurement-variable
identifier, such as CF or MA.
Trace element, such as TRA[ 101.
Real
Maximum
Range Restriction
AA-22 and _
P r o g r a m m i n g
MXM
2 6 5
Advertisement
Table of Contents
