Table of Contents
Advertisement
Addressing the Spectrum Analyzer
Communications between instruments via HP-IB require that a unique address be assigned to each instrument.
The analyzer address, preset at the factory to 18, appears on the CRT display when the LINE power is turned
from STANDBY to ON.
Two formats are available for addressing an HP-IB instrument or device. One command format uses separate
addresses for TALK ("R") and LISTEN ("2"). The other uses only a bus address ("18") to designate the recipient of
the command.
In all examples, the preset address of the HP computing controller is HP-IB SELECT CODE "7"
O U T P U T
0 :
Address Readout
7
P r o g r a m m i n g 5
Advertisement
Table of Contents
