Table of Contents
Advertisement
RC
Recall Last State
Item
DIGIT
The RC command recalls registers containing a set of instrument states. Registers one through six are reserved for
the user, and contain instrument states (such as front panel configuration) sorted with the SAVES or SV com-
mands.
Register 7 is a special register that contains the instrument state prior to the last instrument preset (IP) or single
function change. Use the contents of register 7 to recover from inadvertent entries:
OUTPUT 718;"RC 7;"
Registers 8 and 9 recall factory-selected control settings for calibration purposes.
The functions of the RCLS and RC commands, and front-panel RECALL key are identical. (Also see SAVES or
2 9 8 P r o g r a m m i n g
RC
Description/Default
Specifies analyzer register.
Range Restriction
1 through 9
Advertisement
Table of Contents
