Table of Contents
Advertisement
PLOTTER OUTPUT
GENERAL DESCRIPTION
This chapter describes the procedure for executing the PLOTTER OUTPUT function, and provides information
for preventing problems that may arise while attempting to execute it.
EXECUTING PLOTTER OUTPUT
Connect an HP plotter via HP-IB to the spectrum analyzer:
Set the HP-IB address on the plotter to address 5:
If the address switch on the plotter cannot be located, refer to the plotter's operation manual.
Press the lower left recorder key
The function plots everything that is displayed on the CRT If desired, traces A, B, and C, the annotation and the
graticule can be individually blanked from the CRT using front-panel functions (refer to Chapters 5 and 11).
Chapter 13
16
8
LOWER
LEFT
PLOTTER OUTPUT function.
execute the
EXECUTING PLOTTER OUTPUT
2
4
ADDRESS
Manual Operation
1 1 1
Advertisement
Table of Contents
