Table of Contents
Advertisement
DISPLAY CONTROL
READING AND WRITING
DISPLAY MEMORY
TRACE PROCESSING
1 4 P r o g r a m m i n g
Turns annotation on or off. Preset condition is on.
Specifies amplitude units for input, output, and display
Specifies display line level in dBm
Turns display line on and off
Turns graticule on or off. Preset condition is on.
Turns off CRT beam
Turns on CRT beam
Turns off graticule
Turns on graticule
Turns off annotation
Turns on annotation
Selects log scale
Selects linear scale
Turns off display line
Specifies display threshold value
Turns threshold on or off
Turns off threshold
Dimensions and graphs a trace
Specifies display address
Writes to display (binary) and advances address by 1
Reads display and advances address by 1
Displays the value of a variable on the analyzer screen
Defines a character for label termination
Writes to display and advances address by 1
Sets display to normal size
Sets display to full CRT size
Sets display to expanded size
Erases trace C memory
Graphs specified y values on CRT
Holds or disables data entry and blanks active function CRT
readout
Inputs trace B in binary units
Sets title mode
Writes to display memory in fast binary
Writes to display memory in binary
Prepares analyzer to accept binary display write commands
Writes specified characters on CRT
Returns lower left and upper right vertices of display win-
dow
Draws vectors to specified x and y positions
Turns on beam to view vector
Draws vector from last absolute position
Skips to next display page
Turns off beam, blanking vector
Skips to next control instruction
Writes text string to screen at current pen location
Clear-writes trace A
Max holds trace A
Stores and views trace A
Stores and blanks trace A
Clear-writes trace B
Max holds trace B
Stores and views trace B
Stores and blanks trace B
Stores and blanks specified trace register
Advertisement
Table of Contents
