MKA
Marker Amplitude
Item
REAL
The MKA command specifies the amplitude of the active marker in dBm, when the active marker is the fixed or
amplitude type. (Instrument preset (IP) selects an amplitude marker. See MKTYPE.)
When queried (?), MKA returns the marker amplitude, a real number, followed by a carriage-return/line-feed
(ASCII codes 13, 10). The end-or-identify state (EOI) is asserted with line feed.
OUTPUT 718; "MXCA -2ODM;"
232 Programming
MKA
Description/Default
Range Restriction
Amplitude range of analyzer
screen.