Table of Contents
Advertisement
The DLE command enables or disables the display line.
The function of this command is similar to that of the DL and LI2) commands, and the display line mm and 'm
keys on the front panel.
When queried (?), DLE returns the display line state, ON or OFF followed by carriage-return/line-feed (ASCII
codes 13, 10). The line feed asserts the end-or-identify state (EOI) .
10 OUTPUT718;"IP;DLE ?;"
20 ENTEiR718;AJb
30 PRINT718;Adb
Since IP deactivates the display line, the query in the above program returns "OFF" to the controller.
DLE
OFF
DLE
Display
Line Enable
P r o g r a m m i n g 7 7
Advertisement
Table of Contents
