Table of Contents
Advertisement
TRMATH
Trace Math
Item
COMMAND LIST
LENGTH
STRING
DELIMITER
The TRMATH command executes a command list at the end of a sweep. Compose the command Iii with any of
the following commands only.
Trace Math Commands:
AMB, AMBPL, APB, AXB, BL, BML, BTC, BXC, Cl, C2, EX, KSG, KSH, KSc, KSi, KSI, VAVG
User-Operator Functions:
If an on-end-of-sweep command is encountered, it is executed after the contents of the TRMATH command are
executed.
The operands and resuks of trace math are truncated if they are not within certain limits. If operating on traces A,
B, or C, results must be within 1023. If operating on user-defined traces, results must be within 32,767.
3 4 4 P r o g r a m m i n g
command
s t r i n g
Description/Default
Any spectrum analyzer commands from this
Remote section.
Two &bit bytes specifying length of command
list, in g-bit bytes. The most significant byte is
first: MSB LSB.
Must match. Marks beginning and end of
command list.
I i s t
command
I i s t
Range Restriction
I
I
Advertisement
Table of Contents
