Unconfig Flowstats Filter - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

unconfig flowstats filter

unconfig flowstats filter <filter#>
Description
Removes the filter specification for the specified filter.
Syntax Description
filter# Specifies the filter specification that should be removed.
Default
N/A.
Usage Guidelines
By unconfiguring the filter specification, this effectively disables this filter on all ports for which it was
configured.
Example
The following command resets the values for filter 4:
unconfig flowstats filter 4
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series platforms.
566 ExtremeWare Software 7.0.0 Command Reference Guide