Extreme Networks ExtremeWare Command Reference Manual page 558

Commands for Status Monitoring and Statistics
• Receive Alignment Errors (RX Align)—The total number of frames received by the port that occurs if
a frame has a CRC error and does not contain an integral number of octets.
• Receive Frames Lost (RX Lost)—The total number of frames received by the port that were lost
because of buffer overflow in the switch.
For version 2.0 and 4.0
• Disabled and Not Present are not available as link status indicators.
Example
The following command displays receive error statistics for ports 1 through 3 on a stand-alone switch:
show ports 1-3 rxerrors
The following command displays receive error statistics for slot 1, ports 1 through 3 on a modular
switch:
show ports 1:1-1:3 rxerrors
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.1 to support PoS modules.
This command was modified in ExtremeWare 6.0 to support the Disabled and Not Present link status
indicators.
This command was modified in ExtremeWare 4.0 to support modular switches.
Platform Availability
This command is available on all platforms.
558 ExtremeWare Software 7.0.0 Command Reference Guide