SLB Commands
Service Checking:
IP Address
State
Flow Info
Example
The following command displays the current flow redirect configuration and statistics for the flow
policy "flow1":
show flow-redirect flow1
Following is the output from this command:
Service Check Timer Settings:
Ping-check
Frequency:
TCP-Port-check Frequency:
Service-check
Frequency:
Flow IPSA Mode: Enumeration Mode
http1
Proto:tcp Dest:
Source:
Service Checking: ping
IP Address
24.3.89.145
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all "i" series platforms.
480
Displays the configured service check type.
•
ftp
•
http
•
L4-port
•
nntp
•
ping
•
pop3
•
smtp
•
telnet
Displays the IP address of the next hop.
Displays the status of the next hop, either up or down.
Displays hardware mapping information.
10
Timeout:
30
10
Timeout:
30
60
Timeout: 180
0.0.0.0/ 0
L4-Port:
0.0.0.0/ 0
State
Flow Info
Down
0000
80
Enabled: yes
# Servers Up: 0/1
ExtremeWare Software 7.0.0 Command Reference Guide