Cup In-Band Management - HP Cisco MDS 9216 - Fabric Switch Configuration Manual

Chapter 36 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 36-25
Configure the tunnel with the options shown in
Step 4
Step 5 Check the TapeAccelerator check box to enable FICON tape acceleration over this FCIP tunnel.
Step 6 Click Create.

CUP In-Band Management

The Control Unit Port (CUP) protocol configures access control and provides unified storage
management capabilities from a mainframe computer. Cisco MDS 9000 FICON-enabled switches are
fully IBM CUP standard compliant for in-band management using the IBM S/A OS/390 I/O operations
console.
Note The CUP specification is proprietary to IBM.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Create FCIP Tunnel Dialog Box
Figure 36-25.
Cisco MDS 9000 Family CLI Configuration Guide
CUP In-Band Management
36-37